See what our Experts say about this BAK Industries Tonneau Cover

• Compatibility of BAKFlip MX4 Hard Tonneau Cover with Thule TracRac Sliding Ladder Rack
  The BAKFlip MX4 Hard Tonneau Cover # BAK48122 is a great tonneau cover with the inside bed rails to allow for stake pocket mounted accessories. The Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever # TH43002XT-780EX will fit properly with this cover, however because it is a folding cover, you will need to slide the uprights on the ladder rack when folding the tonneau because the uprights angle inward. If you want a fixed rack that will also work with your cover, the Adarac...
  view full answer...
• Comparing the BAKFlip F1 to the BAKFlip MX4 on 2018 GMC Sierra 3500
  The BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish # BAK48122 and the BAKFlip F1 Hard Tonneau Cover - Folding - Aluminum and Fiberglass # BAK72122 are both excellent choices. The difference is the MX4 has 1/2 inch thick rustproof aluminum panels rated to hold up to 400 lbs evenly distributed. The F1 has 5/8 inch thick fiberglass-reinforced polymer panels with aluminum undersides and insulated cores for strength. The fiberglass will not heat up like the aluminum top...
  view full answer...
• Can the BAKFlip MX4 Tonneau Cover on a 2015 Silverado 2500 Be Folded All the Way Up When Driving?
  Yes, it can Steve! The BAKFlip MX4 Hard Tonneau Cover item # BAK48122 can be folded on top of the last panel or flipped all the way up when you're towing your 5th wheel trailer. I have attached a screenshot from the instructions below that will show you exactly how to do this. The BAKFlip MX4 Hard Tonneau Cover item # BAK48122 has been confirmed to fit the 8' bed models of the 2015 Chevrolet Silverado 2500. If you have any additional questions feel free to throw them into the comment...
  view full answer...
• Recommended Extang Trifecta 2.0 Tonneau EX92455 For 2017 Chevy 3500 Long Bed With
  From what I can find online for inside bed dimensions, I believe the following will work for you...This is based on 24 inch Bed rail height. I reached out to my contact at Extang and they said the Extang Trifecta 2.0 Soft Tonneau Cover - Folding - Vinyl # EX92455 sits about 1 inch above the rails and the lowest part of the frame is about 1/4 inch below with the exception of the clamps about 3 inches below. With a B&W Companion that fits in a gooseneck # BWRVK3500-5W, the hitch height...
  view full answer...
• Bike Rack that Can Attach to Top of BAK MX4 Hard Tonneau Cover
  We have bike racks like the can attach to the top of a hard tonneau cover like the very cost-effective Hollywood Racks Truck Bed Bike Carrier # HRT970. This is a bolt-on product that holds your bike at the fork that would require you to drill through the top of your tonneau. We don't have any options that attach to the stake pockets.
  view full answer...
• Rack For 2019 GMC Sierra 2500 With BAKFlip MX4 Tonneau Cover
  Hey Charles, The BAKFlip MX4 Hard Tonneau Cover # BAK48121 or # BAK48122 for your 2019 GMC Sierra 2500 is compatible with one one rack that will allow you to carry a couple bikes, and that's the TruXedo Elevate. The right one depends on the size of your bed: - 6-1/2' Bed: TruXedo Elevate Truck Bed Rack System # TX46NV - 8' Bed: TruXedo Elevate Truck Bed Rack System # TX66NV The Elevate will essentially give you a roof rack at the rear of your truck, and the bars are adjustable, but...
  view full answer...
• Clearance of BAK48122 Folding Tonneau Cover When Folded Up in Storage Position
  The BAKFlip MX4 Hard Folding Tonneau Cover # BAK48122 is a confirmed fit for your 2018 GMC Sierra 3500 long-bed and when folded up completely the cover's smallest panel (nearest the cab) will be all that takes up bed space. So if you measure 8-inches back from the bulkhead under the cab window that point is where the folded-up cover will extend.
  view full answer...
• TracRack Sliding Ladder Rack Compatibility with Tonneau Cover on 2017 Ford F-250
  The TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH43003XT-000 will work with the Back Revolver X2 # BAK39331, and that seems to use the same rails as the BakFlip # BAK48122 as well as others. I can't confirm a fit with anything other than the Revolver, but the TracRack SR Ladder Rack is compatible with inside the bed rails that do not overlap the side rails of the truck bed because the bed rails are covered with the sliding rack rails that fit in the stake pockets. I've attached...
  view full answer...

Do you have a question about this Tonneau Cover?